CABLE DISTRIBUTION BOX

Cable Distribution Box
European / American / Ring-Main

Name: Cable Distribution Box (European / American / Ring-Main)
Brand: Pengbian Electric
Availability: InStock

Cable branch and ring-network nodes, outdoor rated, load-break switching available. Configured to circuit count and cable size.

Short answer: Pengbian Electric builds 10kV European and American cable distribution boxes and ring-main branch boxes, IP33 or better outdoors, configured to circuit count and cable size — typically 15–25 days.

01 / SPECIFICATIONS

Specifications

Standard range shown below; the technical agreement and factory test report take precedence.

Item	Range / Notes
Type	European (with switch), American (plain branch), ring-main
Rated voltage	12kV / 24kV
Rated current	630A busbar / 200A, 400A, 630A branch
Circuits	2–6 ways, add or remove to drawing
Cable size	25 – 400 mm² depending on termination type
Switch configuration	Load-break switch, switch + fuse, or no switch
Protection	IP33 / IP43 outdoor
Enclosure	Stainless steel / powder-coated steel / GRP
Standards	GB/T 3906, DL/T 404; IEC 62271-200 for export
Accessories	Voltage presence indicator, earthing switch, five-point interlock (switched type)

02 / TYPES

Which type

Type	Features	Application
European (with switch)	Load-break operation, ring extendable	Urban networks, industrial parks
American (no switch)	Simple, low cost	Plain branch nodes, temporary supply
Ring-main	Two incoming supplies, ring operation	Networks with high reliability requirements

The two things that go wrong on cable boxes are cable size and termination type. When you enquire, give the circuit count and the cable specification (e.g. YJV-3×240) together — we match the terminations before quoting a total price.

03 / LEAD TIME

Lead time

Type	Lead time	Conditions
Standard configuration	15–25 days	Drawing confirmed, terminations in stock
Stainless steel enclosure	20–30 days	Enclosure fabrication
Ring-main / many circuits	20–30 days	Scheduled to drawing

04 / FAQ

Frequently asked questions

European versus American?

European types have a switch, allow load-break operation and can be extended into a ring. American types are simpler and cheaper, suited to plain branch nodes.

Can it be installed outdoors at grade?

That is the standard version — IP33 or better on a concrete foundation with bottom entry. On sites prone to standing water we recommend a raised foundation.

Can the circuit count change?

Yes — 2 to 6 ways as standard; beyond that we build to drawing and the enclosure size adjusts.

Is a voltage presence indicator needed?

Switched types come with voltage indication and an earthing switch; five-point interlocking is configured to project requirement.

What is the lead time?

15–25 days standard; 20–30 days for stainless steel enclosures.

Send the parameters, price within 24 hours

Tel / WeChat +86 189 6972 3308　Email cnpengbian@126.com

Request a quote →